NEW FITEL S123C-Extended Kit Fitel S123C-Extended-Kit Handheld Clad Alignment Fusion Splicer Extended Kit with two S943B Batteries and Hard Carrying case
- INCLUDES: 1 - S123C-A Splicer Main Body w/ Heater, 1 - SCC-01 Soft Carrying Case, 1 - S211B-Fiber Optic Stripper, 1 - S325A Hand-Held Precision Cleaver, 1 - S712S-250 250um Fiber Holders (pair), 1 - S943B Battery, 1 - S976A AC Adapter, - S958B Battery Recharger, 1 - S969 Spare Electrodes (1 pair), 1 - D5111 Electrode Cleaning Disk, 1 - FPF-01 Fiber Prep Fluid, 1 - FW-01 Fiber Wipes, 1 - V-Groove Cleaning Brush
Low-Profile Hand-Held Fusion Splicer Single Fiber 1 Year USA Factory Warranty PLUS an additonal 1 year extended warranty at no charge !! 207-221-3154 or limited availability, so call for a no obligation quote** . | | FITEL S123 fusion splicer |
The fusion splicers have a metal body frame that provides both speed and durability in a smaller and lighter hand-held design. The fusion splicers are also supported with rubber corners, which improve impact and shock resistance and offer protection in demanding environmental conditions. The splicer delivers rapid heating at about 25 seconds and rapid splicing at about 13 seconds with low loss for a single fiber. The splicer is compatible with the Diamond splice-on-connector (SOC) and the Seikoh Giken and is available for all LAN, METRO and FTTx fibers. The FITEL fusion splicers are also dust and water resistant, while the S123 fusion splicers can be easily maintained as a result of mirror free alignment system. With its low profile and new super rugged body, the FITEL S123C Series Fusion Splicer offers speedy operation for FTTX, LAN, backbone or long-haul installations. The lightweight, durable metal body frame and rubber protection corners provide robust protection, enabling use in challenging locations without compromising splicer performance. The FITEL S-123C is water resistant to IPX2 and dust resistant to IP5X. Large battery capacity makes it possible to perform up to 70 cycles of splicing and heating. Combining portability, power flexibility and field ruggedness, the FITEL S123-C Splicer delivers fast and consistent splicing with outstanding mobility and extreme ease-of-use. It also offers a splice-on-connector (SOC) solution. - The FITEL S123/C passed manufacturer testing based on criteria below:
- Drop resistant – 76 cm drops from 5 different angles
- Water resistant – IPX2 rating drip proof
- Dust resistant – IP5X rating dust proof
- Rugged and compact hand held design for demanding environmental conditions
- Fast splice (13 sec) at low loss and fast heating (25 sec) for single fiber
- Simple operation with fixed V-groove
- Splicer is compatible with Seikoh Giken & Diamond SOCs
- 70 cycles (splicing & heating) with a single battery
- Available for all METRO/LAN/FTTX fibers including ultra bend-insensitive fibers (e.g. EZ-Bend Fiber)
- Easy maintenance - Tool-less electrode replacement/mirror free alignment system
- Easy software upgrade via the Internet
- Easily exchanged fiber holder systems (tight holder/fiber holder/SOC holder)
- PC interface software to allow user management of splicing programs and results
- Auto-start shrink sleeve oven feature
- Improved GUI to further enhance ease-of-use
- Large memory for storing data (2,000 splice data) and image (100 images)
- RoHS compliant
| | Specification | | Applicable Fibers | SMF(ITU-T G.652), MMF(ITU-T G.651), DSF(ITU-T G.653), NZDSF(ITU-T G.655), BIF/UBIF (Bend insensitive fiber, ITU-T G.657) | | Cladding Diameter | 125 µm | | Coating Diameter | 250 ~ 900 µm | | Fibers Cleave Length | 5 ~ 10 mm | | Average Splice Loss | SM: 0.05 dB, MM: 0.03 dB, DSF: 0.08 dB, NZDSF: 0.08 dB | | Splice Time | 13 seconds | | Heat Time | 25 seconds (S922: 40 mm, S921: 60 mm) (Pre-heat mode)
35 seconds (S924: 40 mm) (Pre-heat mode) | | Splice Programs | Max. 150 | | Heat Programs | Max. 18 | | Automatic Heating Start | Available | | Applicable Sleeves | 20/40/60 mm | | Fiber Holding | Tight holder (Loose tube applicable) or Fiber Holder System | | Tension Test | 1.96 N | | Fiber Image Magnification | 120X | | Splice Memory | Max. 2,000 | | Image Capture Capacity | Last 100 images to be automatically captured + Up to 24 images to be stored permanently | | Dimensions | 127W × 199D × 81H mm (not including shock absorber)
159W × 231D × 104H mm (including shock absorber) | | Weight | 1.4 kg (without battery)
1.6 kg (with S943B battery) | | Data Output | USB ver.2.0 mini | | Displaying Language | 20 languages (e.g. English, Spanish, Japanese, Chinese) | | Altitude : Single fiber | 5,000 m | | Power Source | AC Input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V | | Battery Capacity | Typical 70 splice/heat cycles with S943B battery | | Operating Temp. | -10 to +50 °C (without excessive humidity) | | Storage Temp. | -40 to +60 °C (without excessive humidity) |
|
| | Specification | | Applicable Fibers | SMF(ITU-T G.652), MMF(ITU-T G.651), DSF(ITU-T G.653), NZDSF(ITU-T G.655), BIF/UBIF (Bend insensitive fiber, ITU-T G.657) | | Cladding Diameter | 125 µm | | Coating Diameter | 250 ~ 900 µm | | Fibers Cleave Length | 5 ~ 10 mm | | Average Splice Loss | SM: 0.05 dB, MM: 0.03 dB, DSF: 0.08 dB, NZDSF: 0.08 dB | | Splice Time | 13 seconds | | Heat Time | 25 seconds (S922: 40 mm, S921: 60 mm) (Pre-heat mode)
35 seconds (S924: 40 mm) (Pre-heat mode) | | Splice Programs | Max. 150 | | Heat Programs | Max. 18 | | Automatic Heating Start | Available | | Applicable Sleeves | 20/40/60 mm | | Fiber Holding | Tight holder (Loose tube applicable) or Fiber Holder System | | Tension Test | 1.96 N | | Fiber Image Magnification | 120X | | Splice Memory | Max. 2,000 | | Image Capture Capacity | Last 100 images to be automatically captured + Up to 24 images to be stored permanently | | Dimensions | 127W × 199D × 81H mm (not including shock absorber)
159W × 231D × 104H mm (including shock absorber) | | Weight | 1.4 kg (without battery)
1.6 kg (with S943B battery) | | Data Output | USB ver.2.0 mini | | Displaying Language | 20 languages (e.g. English, Spanish, Japanese, Chinese) | | Altitude : Single fiber | 5,000 m | | Power Source | AC Input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V | | Battery Capacity | Typical 70 splice/heat cycles with S943B battery | | Operating Temp. | -10 to +50 °C (without excessive humidity) | | Storage Temp. | -40 to +60 °C (without excessive humidity) |
|
The S123CA Fitel S123C-A Hand-Held Clad Alignment Fusion Splicer with Soft Case and 1 set of holders alone is $6055 |
Sign In
pfbFvNJBMjjM!5n9g~~_1_1942_1.JPG)
